Tapered sleeve can be mounted on smooth or steppedshafts. The optical shaft can be installed in any required position, and thestepped shaft can be installed in the required position with the Adapter sleeves with tapered bore bearings canbe mounted on smooth or stepped shafts.
带锥孔轴承的紧定套可以安装在光滑轴或阶梯轴上。
Adapter sleeves with taperedbore bearings can be mounted on plain shafts or stepped shafts.
带锥孔轴承的紧定套可以安装在光轴或阶梯轴上。
无法加载全部结果
重试
正在重试…
正在重试…
L-shaped retaining ring.
The optical shaft can beinstalled in any required position, and the stepped shaft can be installed inthe required position with the L-shaped retaining ring.
光轴可以安装在任何需要的位置，阶梯轴可以用L型挡圈安装在需要的位置。
The optical shaft can beinstalled at any required position, and the stepped shaft can be installed atthe required position with the L-shaped retaining ring.
光轴可以安装在任何需要的位置，阶梯轴可以用L型挡圈安装在需要的位置。
无法加载全部结果
重试
正在重试…
正在重试…
无法加载全部结果
重试
正在重试…
正在重试…
Normally, adapter sleeve with inner diameter ≤200mmuses a locking gasket to prevent it from retreating; and inner diameter>200mm uses a locking card (the British system uses a locking piece) toprevent it from retreating. It is also possible to use the nut with its ownlocking device for backstop. The inner diameter >200mm and the outer diameter are distributed with oil passages
Under normal circumstances, the adapter sleeve with inner diameter ≤200mmuses a locking gasket to prevent it from retreating; the adapter sleeve with aninner diameter >200mm uses a locking card (the British system uses a lockingpiece) to prevent it from retreating.
一般情况下，内径≤200mm的紧定套采用锁紧垫片防止其后退；内径>200mm的紧定套采用锁紧卡（英制采用锁紧片）防止后退。
Under normal circumstances, the adapter sleeve with inner diameter ≤200mmuses a locking gasket to stop the retreat; the adapter sleeve with an innerdiameter >200mm uses a locking card (the British system uses a lockingsheet) to prevent the retreat.
一般情况下，内径≤200mm的紧定套采用锁紧垫片止退；内径>200mm的紧定套采用锁紧卡（英制采用锁紧片）防止后退。
无法加载全部结果
重试
正在重试…
正在重试…
It is also possible to use the nut with its own locking device forbackstop.
也可以使用带有自身锁定装置的螺母作为逆止器。
It is also possible to use the nut with its own locking device to preventthe backlash.
也可以使用带有自己锁定装置的螺母来防止间隙。
无法加载全部结果
重试
正在重试…
正在重试…
无法加载全部结果
重试
正在重试…
正在重试…
along the circumferential direction. It is moreconvenient to disassemble the adapter sleeve with oil passage by oil injectionor by hydraulic nut.
Thecomposition of the sleeve：
Imperial axis
Common English system codes:
（Inch）：SNW*** SNP***
S：Sleeve S：Sleeve
N（AN）：Lock nut N(AN)：Lock nut
W (TW)：Lock washer P（PL）：Lock washer
Tapercode description：
H : Taper 1:12 Adapter sleeve eg.：H205 ; H315 ; H2305
H2：Taper 1:30 Adapter sleeve eg.：H24020 ; H24120
JIS,DIN, the standard part codesof other manufacturers are different from the national standard. Details please consult with IVY POWER.
