Withdrawal sleeve can be mounted on stepped shafts.Withdrawal sleeve can be radially squeezed between the inner ring of thebearing and the shaft through the shaft cover or nut of the shaft shoulder toachieve the purpose of tightening. When disassembling, it can be disassembledwith Adapter sleeves with tapered bore bearings canbe mounted on stepped shafts.
带锥孔轴承的紧定套可以安装在阶梯轴上。
Adapter sleeve with taperedbore bearing can be installed on stepped shafts.
带锥孔轴承的紧定套可以安装在阶梯轴上。
无法加载全部结果
重试
正在重试…
正在重试…
The withdrawal sleeve can beradially squeezed between the inner ring of the bearing and the shaft throughthe shaft cover or nut of the shaft shoulder to achieve the purpose oftightening.
退卸套可通过轴肩的轴盖或螺母径向挤压在轴承内圈与轴之间，达到拧紧的目的。
The withdrawal sleeve can beradially squeezed between the bearing inner ring and the shaft through theshaft cover or the nut of the shaft shoulder to achieve the purpose oftightening.
退卸套可通过轴盖或轴肩的螺母径向挤压在轴承内圈与轴之间，达到拧紧的目的。
无法加载全部结果
重试
正在重试…
正在重试…
the nut on the withdrawal sleeve.
The inner diameter > 200mm and the outerdiameter are distributed with oil passages
Under normal circumstances,the adapter sleeve with inner diameter ≤200mm uses a locking gasket to preventit from retreating; the adapter sleeve with an inner diameter >200mm uses alocking card (the British system uses a locking piece) to prevent it fromretreating.
一般情况下，内径≤200mm的紧定套采用锁紧垫片防止其后退；内径>200mm的紧定套采用锁紧卡（英制采用锁紧片）防止后退。
Under normal circumstances,the adapter sleeve with inner diameter ≤200mm uses a locking gasket to stop theretreat; the adapter sleeve with an inner diameter >200mm uses a lockingcard (the British system uses a locking sheet) to prevent the retreat.
一般情况下，内径≤200mm的紧定套采用锁紧垫片止退；内径>200mm的紧定套采用锁紧卡（英制采用锁紧片）防止后退。
无法加载全部结果
重试
正在重试…
正在重试…
It is also possible to usethe nut with its own locking device for backstop.
也可以使用带有自身锁定装置的螺母作为逆止器。
It is also possible to usethe nut with its own locking device to prevent the backlash.
也可以使用带有自己锁定装置的螺母来防止间隙。
无法加载全部结果
重试
正在重试…
正在重试…
无法加载全部结果
重试
正在重试…
正在重试…
along the circumferentialdirection. It is more convenient to disassemble the adapter sleeve with oilpassage by oil injection or by hydraulic nut.
Metric：AH***
GB different from DIN,details please consult with IVY .
Tapercode description：
AH :Taper 1:12 Withdrawal Sleeve eg.：AH205 ; AH315 ; AH2305
AH2：Taper 1:30 Withdrawal Sleeve eg.：AH24020 ; AH24120
