The correct installation of the adaptersleeve affects accuracy, lifespan, and performance. Therefore, the design andassembly department should fully study the installation of the locking sleeve.I hope to install according to the homework standards. The items of homework standardsare usually as follows:

(1) Clean the locking sleeve and theconnecting part of the locking sleeve

(2) Check the dimensions and precisionmachining of related components

(3) Installation

(4) Inspection after installing the sleeve

(5) Supply lubricant

I hope to open the sleeve packaging shortlybefore installation. Generally lubricated with grease, without cleaning,directly filled with grease. Lubricating oil lubrication is not necessary forregular cleaning, but for instrument or high-speed use, the set sleeve should becleaned with clean oil to remove rust inhibitors applied to the set sleeve.Adaptersleeve without rust inhibitor is prone to rusting, so it cannot be leftunattended. Furthermore, the sleeve that has been sealed with lubricatinggrease can be used directly withoutcleaning.

The installation method of the sleevevaries depending on the structure, fit, and condition of the sleeve. Generally,due to the fact that it is mostly a shaft rotation, the inner ring requires aninterference fit. Cylindrical hole sleeve, often pressed in with a press or hotfitting method. In the case of a tapered hole, it can be installed directly onthe tapered shaft or with a sleeve.When installed on the casing, there isgenerally more clearance fit and interference fit on the outer ring. It isusually pressed in with a press or there is also a cold shrink fit method forinstallation after cooling. In situations where dry ice is used as a coolantand cold shrink is used for installation, moisture in the air will condense onthe surface of the sleeve. So, appropriate rust prevention measures are needed.